MSL Alumni
1990 | 1991 | 1992 | 1993 | 1994
1995 | 1996 | 1997 | 1998 | 1999
1990
Mark R. Cox
Materials Science & Engineering, M.S.
An economic evaluation of the investment casting industry
Richard Andrew Krueger
Materials Science & Engineering, M.S>
A technical and economic analysis of competing connection technologies in electronic packaging
Shou-chi Lin
Materials Science & Engineering, M.S.
An economic analysis on two-piece beverage containers
Narayan Vydianathan Nallicheri
Materials Science & Engineering, Ph.D.
A technical and economic analysis of alternate net shape processes in metals fabrication
Lee Hong Ng
Materials Science & Engineering, Ph.D.
Printed circuit board materials : an evaluation of manufacturing technologies and market requirements
Sung-Bin Park
Materials Science & Engineering, B.S.
Evolution of automobile material content and impacts upon recycling and disposal
Ziad Queslati
Materials Science & Engineering, M.S.
A material and policy assesssment in the automotive pressure sensor industry
1991
Andrew Chen
Materials Science & Engineering, M.S.
Economic aspects of materials substitution in horizontal automotive body panels : the issue of SMC surface finish
Mark Denison Jenks
Materials Science & Engineering, Sloan School of Management, M.S.
Technical cost modeling for evaluation of developmental manufacturing technologies : a case study of Boeing's high speed civil transport
Bridget A. Vignos
Civil & Environmental Engineering, M.S.
Influence of environmental regulation on automobile materials substitution decisions--the plastic fuel tank
1992
Christine E. Costa
Materials Science & Engineering, B.S.
A dual perspective analysis of materials for the food and beverage industries : a case study from within the bottled water industry
James Edwin Neely, III
Materials Science & Engineering, M.S.
The commercial potential for advanced ceramics produced by low pressure injection molding
Richard Roth
Materials Science & Engineering, Ph.D.
Materials substitution in aircraft gas turbine engine applications
1993
Christophe G.E. Mangin
Materials Science & Engineering, Ph.D.
Advanced engineering materials for automotive engine components : cost and performance estimations
Jane Song
Materials Science & Engineering, M.S.
Decision analysis and economic modeling of airbag sensor systems
1994
Russell S. Cohn
Mechanical Engineering, M.S.
Electric vehicle life cycle analysis
Helen N. Han
Materials Science & Engineering, Ph.D.
The competitive position of alternative automotive materials
1995
Andrew Chen
Materials Science & Engineering, Ph.D.
A product lifecycle framework for environmental management and policy analysis : case study of automobile recycling
Chuin Ping Chen
Civil & Environmental Engineering, M.S.
Automotive painting : achieving a technological, economic and environmental balance
Hans Jacob Sverdrup Heder
Mechanical Engineering, B.S.
Cost and economic competitiveness of adhesively bonded aluminum body-in-white
Demetrios Politis
Aeronautical & Astronautical Engineering, M.S.
An economic and environmental evaluation of aluminum designs for automotive structures
1996
Luis David German
Materials Science & Engineering, M.S.
Automobile valve manufacturing : technical and econoimc analysis
Geoffrey Cade Murray
Materials Science & Engineering, B.S.
Cost modeling resin transfer molding for use in the automotive industry
1997
Jeremy Warren Cram
Mechanical Engineering, M.S.
Cost modeling of a new manufacturing facility
Charlotte Anne Geffen
Civil & Environmental Engineering, Ph.D.
Innovative environmental technologies in automotive painting : the role of suppliers
Anil Jain
Materials Science & Engineering, M.S.
An analysis of automotive body assembly technologies and their implications in lightweight vehicle development
Anna M. Lokka
Materials Science & Engineering, M.S.
An economic evaluation of tailor welded blanks in automotive applications
Elicia M.A. Maine
Materials Science & Engineering, M.S.
Future of polymers in automotive applications
Harsha G. Marti
Materials Science & Engineering, B.S.
The cost modeling of automotive body-in-white assembly using relational databases
Nicole L. Wildern
Mechanical Engineering, M.S.
Total cost analysis of pollution prevention in automotive electrocoating
1998
Thomas Besson
Materials Science & Engineering, S.M.
Simulation modeling as a tool for assessing the impact of inventory control and scheduling policies in the manufacturing of specialty steel
Luis David German
Materials Science & Engineering, Ph.D.
Low volume manufacturing strategies for the automotive industry : a global and emerging economy perspective
Paul J. Kang
Materials Science & Engineering, S.M.
A technical and economic analysis of structural composite use in automotive body-in-white applications
James Edwin Neely, III
Materials Science & Engineering, Ph.D.
Improving the valuation of research and development : a composite of real options, decision analysis and benefit valuation frameworks
Samuel Albert Newell
Materials Science & Engineering, Ph.D.
Strategic evaluation of environmental metrics : making use of life cycle inventories
1999
Karsten A. Kallevig
Materials Science & Engineering, S.B.
Benchmarking of the automotive steel stamping industry
Randolph E. Kirchain
Materials Science & Engineering, Ph.D.
Modeling methods for complex manufacturing systems : studying the effects of materials substitution on the automobile recycling infrastructure
